Victron Blue Smart IP65 Battery Charger 230V

The Victron Blue Smart IP65 is a sealed, waterproof battery charger with Bluetooth built in. It's dust, water and chemical resistant, so it suits workshops, boats, caravans and anywhere it might get wet or dirty. It charges flooded, AGM, gel and lithium (LiFePO4) batteries, and comes with both crocodile clamps and M8 eyelet leads. Which one do I need? 6V/12V 1.1A Motorbikes, ride-on mowers, small 6V or 12V batteries (20–50Ah) 12V 4A or 5A Motorbikes, jet skis, small car batteries (20–50Ah) 12V 7A Cars and small 4WDs (20–70Ah) 12V 10A Cars, 4WDs, small house batteries (30–100Ah) 12V 15A 4WDs, boats, caravan and camper house batteries (50–150Ah) 12V 25A Large house banks and deep-cycle batteries (80–250Ah) 24V 5A / 8A / 13A Trucks, machinery, 24V boats and forklifts (20–50Ah / 30–80Ah / 50–130Ah) Key features Bluetooth and the VictronConnect app: check voltage and current, change settings and update firmware from your phone. IP65 sealed: fully protected against dust and water jets, with no fan or moving parts, so it runs silently. 7-stage adaptive charging, including reconditioning and a storage mode that cuts plate corrosion on batteries left connected for long periods. Recovers flat batteries: starts charging from as low as 0V, where most chargers won't recognise the battery at all. Lithium mode with automatic under-voltage protection reset for LiFePO4 batteries. Temperature compensated: measures ambient temperature and adjusts the charge voltage automatically, with no settings needed for hot or cold conditions. Up to 95% efficient and only 0.5W standby once the battery is full. Doubles as a power supply, with reverse polarity, short circuit and over-temperature protection. 5-year Victron warranty. Specifications Models 6V/12V: 1.1A12V: 4A, 5A, 7A, 10A, 15A, 25A24V: 5A, 8A, 13A Input voltage 6V/12V 1.1A: 100–250 VAC, 45–65 Hz12V and 24V: 230 VAC Efficiency 6V/12V: 82% | 12V: 94% | 24V: 95% Standby power 0.5W Low current mode 6V/12V: 0.5A12V 4/5/7/10/15/25A: 2 / 2 / 2 / 3 / 4 / 10A24V 5/8/13A: 2 / 3 / 4A Absorption voltage 12V: 14.4V normal / 14.7V high / 14.2V Li-ion24V: 28.8V normal / 29.4V high / 28.4V Li-ion6V: 7.2V / 7.35V / 7.1V Li-ion Float voltage 12V: 13.8V / 13.8V / 13.5V Li-ion24V: 27.6V / 27.6V / 27.0V Li-ion6V: 6.9V (disabled in Li-ion mode) Storage voltage 12V: 13.2V / 13.2V / 13.5V Li-ion24V: 26.4V / 26.4V / 27.0V Li-ion6V: 6.6V / 6.6V / 6.75V Li-ion Charge algorithm 7-stage adaptive Protection Reverse polarity, output short circuit, over temperature Operating temperature 12V and 24V: -40 to +60°C6V/12V: -30 to +50°C(full rated output up to 30°C) Humidity Max 95% non-condensing Protection rating IP65 (dust tight, protected against water jets) Battery leads 1.5 m red and black cable, with crocodile clamps and M8 eyelets Mains lead 1.5 m with AS/NZS 3112 (Australian) plug Dimensions (H x W x D) 6V/12V 1.1A: 38 x 64 x 153 mm12V 4A/5A: 45 x 81 x 182 mm12V 7A, 24V 5A: 47 x 95 x 190 mm12V 10A/15A, 24V 8A: 60 x 105 x 190 mm12V 25A, 24V 13A: 75 x 140 x 240 mm Weight 0.4 kg (1.1A) to 1.9 kg (12V 25A, 24V 13A) Standards EN 60335-1, EN 60335-2-29, AS/NZS certified

Prices include GST. Shipping calculated at checkout. Fitting quoted separately.